تفليش KU990 عبر USB

عدد المساهمات : 248 تاريخ التسجيل : 08/10/2012

تفليش KU990 عبر USB

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

For fewer problems, thanks to unlock your phone tutorial available
here. If it is already unlocked, you can switch to flash. The release
does not pass on higher versions v10g with this method (v10g included).
Start LGMDP_H3G_SC_mod_Ku990.EXE. Download HERE
Click on "select port" connected with the mobile phone (USB mode data service)
Select the COM port for your ku990 and click connect. (photo1)

Pick
up your firmware by clicking the browse line Image Folder. (1 photo
2). See section below "in case of trouble" if your firmware in *. dz.
Choose Reset database & content, say Ok to the warning message. (2 photo 2)

Click on START.
The flash begins. Laissez faire, the KU990 will turn on and off several
times, it's normal. The yellow screen is normal too.
Once the message "Download
Completed" appears on the soft and the calibration of the stylus on
the mobile phone is that the flash is finished. Do not disconnect your mobile BEFORE!

Your Ku990 is now flashed and updated.

In case of problems:

If
the mobile phone would indicate "invalid sim", flash the file to your
flex.ini ku990. Is that your mobile has not been unlocked before the
flash
If no network must rewrite the nv files
The firmware can be formatted ***. dz in the photo above, choose DS bottom right and enter your firmware format dz.
If
your ku990 not light at all, place in EMERGENCY DOWNLOAD: press at the
same time, "lock, camera, call (green button) 'C' key" press it and
staying power press (red button). Once the phone turns on emergency
mode and is recognized by the soft flashing.

Reset your ku990

This manipulation is recommended in case of bug in your device, or to
reset all, or if it does not start properly (sas redémmarre stops)

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

To know the version of your ku990